Analysis of drawing process of EDM accessories

 KENOS is Dongguan,China EDM accessories professional manufacturer and wholesaler, proficient in drawing process of EDM accessories and technical requirements of parts. Today, through the analysis of KENOS drawing process of EDM accessories, solve the problem for friends. We focus on the analysis of the surface roughness of wire cutting parts and machining accuracy whether online cutting can achieve economic sugar within the range of process conditions of wire cutting parts and parts of the concave arc tip arc with wire cutting, wire cutting parts and parts structure and material selection is reasonable.
    A. Material selection and heat treatment requirements for EDM accessories.
    B.Machining accuracy requirements.
    C.Determine the concave arc and arc angle
    D. Structure and technology ofwire cutting parts
    The structure of EDM accessories shall meet the requirements of machining process, should also fully consider the structure process for wire cutting processing, to convenience, and to minimize the processing surface, in order to reduce the workload and tools, wire electrode and material consumption. However, it is very important to reasonably determine the surface roughness of the wire cut, because the size of the linear cutting speed directly affects its size. The structure of the EDM accessories should be helpful to shorten the auxiliary time, such as the line cutting parts should be convenient for positioning and clamping, easy to check.
     F.Surface roughness analysis of EDM accessories
     Analysis of drawing process of EDM accessories processing machine surface processing from the line, wire cutting surface and the machined surface formation is different, the main difference is that the machined surface cutting line formed by non directional numerous small pits and hard flanges, particularly conducive to the preservation of lubricating oil, and the machined surface are cutting or grinding knife, has obvious orientation. Therefore, in the case of the same surface roughness value, the wear resistance and lubrication performance of the wire cut surface are better than that of the machined surface. However, it is very important to reasonably determine the surface roughness of the wire cut,because the size of the linear cutting speed directly affects its size.If you need to use Wire edm wear parts,contact KENOS please!

Above article from KENOS official website https://www.wedm-accessories.com/
The original address:https://www.wedm-accessories.com/

Characteristic of EDM current supply A97L-0001-0664

EDM current supply is wire EDM pare parts, EDM current supply belongs to wire power feed contacts,  it is used for FANUC brand EDM, in hardware and plastic mold type etc.. There are four main types of its material, namely tungsten cobalt hard alloy (WC+Co) (YG), cobalt (WC+TiC+Co) tungsten titanium carbide (YT), cobalt (WC+TaC+Co) tungsten tantalum carbide (YA) and tungsten tantalum titanium cobalt hard alloy (WC+TiC+TaC+Co)) (YW). Its application is very extensive. Today, I introduce KENOS (Dongguan KENOS Hardware Technology Co., Ltd.) EDM current supply A97L-0001-0664, and the  Characteristic of EDM current supply A97L-0001-0664.
   EDM current supply A97L-0001-0664 in mm size calculation, the specification is 9mm*10mm*25mm, the application of Fanuc models is also very much, and it has the advantages of high purity and good toughness. The following small series  to show.
Name:Current supply
Coding:A97L-0001-0664
Specification:25 mm x 9 mm x 10 mm
Compatible:Fanuc E, Fanuc H, Fanuc I with AWF, Fanuc I without AWF, Fanuc J with AWF, Fanuc J without AWF, Fanuc K with AWF, Fanuc K without AWF, Fanuc L with AWF, Fanuc L without AWF
Kenos model:F001
   Above clearly shows the characteristics of EDM current supply A97L-0001-0664, EDM current supply is one of the WEDM power feed contact.KENOS is a professional brand WEDM wire power feed contacts manufacturers,and wire cutting supplies accessories wholesale, all products have a price advantage and quality, our products to various types of customers, can withstand the test of quality!

Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com/32.html, reproduced please specify.yizebg702

Supply Fanuc WEDM wear parts

   WEDM wear parts and EDM consumables are the largest and most professional mall scale mold. For Fanuc WEDM wear parts to KENOS,we KENOS will be your private custom wire accessories manufacturer, main products: wire fittings, WEDM wear parts, diamond guides,water nozzle, conductive block, Hitachi EDM consumables accessories, the tension wheel, an insulating plate, the machine head, spare parts, copper wire, resin etc.. The product is complete, the model is much, the brand is many, everything.
    Now, we look together,what KENOS Fanuc WEDM wear parts are? Such as Fanuc Wire Connected parts, bearing,Fanuc wire water nozzles, flushing nozzle, such as flushing nozzle. Fanuc WEDM wear parts not only rich and colorful, brand and diverse models, in other words is complete. More is the processing, the work is very fine. In addition, we have staff take Fanuc WEDM wear parts specialized technology, customers can be customized to map, and thoughtful service, let you impeccable.Below I to Fanuc WEDM wear parts' pictures to friends.
Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com/Fanuc_WEDM_wear_parts.html, reproduced please specify. yizebg702



 

What are the drill EDM wear parts?

 With the rapid development of machine tools, EDM is also becoming more popular, because, in many industries, the use of drill EDM wear parts, although these parts have wear. Therefore, the drill EDM wear parts coming, drive the development of many industries, such as cars, mobile phone, hardware, aerospace industry, etc., so that the drill EDM wear parts is very important for the people, China, And ,what are the drill EDM wear parts? KENOS is a professional Chinese manufacturers engaged in wholesaleing EDM Consumables accessories,the drill EDM wear parts is one of our production, but also get a line of customers at home and abroad of cutting parts,and what are KENOS  the drill EDM wear parts? The following is a detailed introduction to the types of them.
   The drill EDM wear parts are essential parts of EDM accessories, so it is very important to the technician,KENOS the drill EDM wear parts main spindle, rotary coupling, collets, guides, chucks and seals. These materials are plastic, of course, there are also alloy. Alloy such as chuck (E010 filter element, ER chuck and holder keyless and Sodick TS drill collet), such as plastic blocklets (electrode seal, electrode seal domestic, Sodick TS electrode seal), whether it is plastic or alloy, the quality of these Chinese made Wire edm wear parts is very good.

Above article from KENOS official website (http://www.edm-accessories.com/)

The original address:http://www.edm-accessories.com/the_drill_EDM-wear_parts.html, reproduced please specify.yizebg702

Guangdong power feed contacts for wire EDM,China wire EDM wear parts supplier

 For wire EDM wear parts supplies, I believe that a lot of WEDM industry friends are not unfamiliar, but where there is preferential and suitable for power feed contacts for wire EDM supply in China? Many friends will say that Alibaba can directly look for it, I can tell the price comparison, but the power feed contacts for wire EDM, not just cheaper prices, and also for your EDM model, the best is the original goods, so as not to damage your wire walking machine, so now buy line cutting the power feed contacts for wire EDM not only see things are cheap and not only the quality of high quality, it has its value, my friends, is ti? Which is the best supplier of power feed contacts for wire EDM in China? Let us look at the Guangdong manufacturers-KENOS power feed contacts for wire EDM.
    KENOS is a professional wholesale wire EDM wear parts supplier, wire walking machine brand power feed contacts for wire EDM include: Mitsubishi,Sodick,Ona,Japax, Makino,Fanuc, Hitachi, Brothers,Chmer, Excetek,Astec,AMS Tech,Agie etc. Those genuine original accessories supply.
    Therefore, our products are rich, price concessions, as is the wholesale manufacturers, original authentic, so there is a lot of sales in the market, many customers have a fixed,  power feed contacts for wire EDM in Guangdong,  power feed contacts for wire EDM high quality and inexpensive, and friends can come to we KENOS understand the wire EDM wear parts. If you need wire EDM wear parts, we are also a very good Wire edm wear parts supplier in China.

Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com/31.html, reproduced please specify. yizebg702

Why Mitsubishi wire EDM accessories processing is precision?

 Why Mitsubishi wire EDM accessories processing is precision? This is a lot of people are concerned about the problem. Mitsubishi wire cutting lathe is turning parts size quickly in place, it is also the last step down line wire accessories production or processing of cutting machine feed, with copper wire or wire hoe to cut, this can be seen wire EDM fittings, work precision, KENOS is Dongguan's first Mitsubishi wire EDM accessories processing precision of 0.001MM production at home, its surface quality is close to grinding level, manufactured by Mitsubishi wire EDM accessories surface is quite smooth, wire cutting machine is mainly used for precision fine small pieces of various complex shapes, the speed of the wire is less than 0.2M/S, roundness error and Mitsubishi wire cutting machine, angle error and the size of the error is more than 10 times the wire speed, so in high precision machining Mitsubishi wire EDM accessories, Mitsubishi wire EDM cutting has been widely used, KENOS is strong As a Mitsubishi wire EDM manufacturer which is popular with friends, and from the processing in Mitsubishi wire EDM accessories we can know the reason why Mitsubishi wire EDM accessories is precision!

Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com/Mitsubishi_wire_EDM_accessories.html, reproduced please specify.yizebg702

The advantage of wire guide 3081000/3080990/3080991 manafacturer

 With the extensive use of wire EDM wear parts, customers have become more and more clear about the requirements of the wire EDM wear parts, not only not only to illustrate what kind of accessories, but also what the number of accessories. For example, wire guide 3081000/3080990/3080991, wire guide 3081000/3080990/3080991 manafacturer that to meet the customer's requirements before you can. For example, we KENOS's wire EDM wear parts can meet the requirements of customers, then what are the advantages of wire guide 3081000/3080990/3080991 manafacturer?
   1 professional manufacturer, one hand supply
KENOS all wire EDM wear parts are their own hardware production, provide first-hand supply of goods for you, the quality assurance, we provide perfect pre-sale service and customer service.
   2 professional wire EDM wear parts for 12 years
Our wire EDM wear parts field has the rich production experience, 12 years of excellence, to ensure that every product excellent quality, we provide 7 days no reason to return service.
   3 international first-line brand ODM strategic partner
For a long time, we have been providing ODM services for the international first-line brand, the world's top consumable parts mold development experience.
   4 buy a variety of products, save time and worry
Our products are rich in variety, basic covers all models of all parts supplies, one stop to buy, for you to save most of the time.
   Wire guide 3081000/3080990/3080991 manafacturer wholesale Wire Guides not only to meet customer requirements on the number, but also in the brand is very rich. Such as Mitsubishi, Sodick, Sharmilles, Chmer, etc..

Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com/wire_guide_3081000/3080990/3080991_manafacturer.html, reproduced please specify. yizebg701



 

what is the difference between the wire EDM consumable accessories and mold parts?

Wire EDM consumable accessories and mold parts: what is the difference? In fact,for the people who just engaged in mold industry is not clear, and wire EDM consumable accessories also belongs to the mold industry. And next,let me explain to you the difference between wire edm consumable accessories and mold parts! Take wire EDM consumable accessories are consumable mould processing equipment, as the name suggests is a wire EDM machine on the preparation of all. Take silk accessories with the same mold parts with various shapes, some wire EDM consumable accessories are also out of the mold processing. Just not used in the mold, but used in the device, as well as the analysis of the drawings. For example,KENSO(Dongguan KENOS Hardware Technology Co., Ltd. in China) take some wire EDM consumable accessories material is steel, with grinding machine, milling machine, computer gongs, processing production, the plastic material is made by die injection; stressed wire EDM consumable accessories only in wire cutting equipment. And compared to the use of parts of the mold is more widely, such as: electronics, optics, machinery, medical equipment industry, etc...
   just now,I mentioned wire EDM Consumables in machine production, that is to say take wire EDM consumable accessories and is closely related to the machine, some brands such as Sodick EDM, Mitsubishi EDM, Fanuc EDM and so on.Of course,corresponding with Sodick EDM,Mitsubishi EDM accessories, Fanuc EDM accessories etc...
Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com/wire_EDM_consumable_accessories.html, reproduced please specify.yizebg701

What are the features of the Mitsubishi wire filter?

I believe that friends have heard of Mitsubishi  WEDM, yes, Mitsubishi this brand is very popular with the hardware industry friends welcome. So what are the characteristics of the Mitsubishi wire filter? The wire filter has a cylindrical, flat cylinder, and a wide variety of shapes. Mitsubishi wire filter weight about 5KG, the service life of up to many years, but also can be easy to clean. Precision fine filtration. The following details of Mitsubishi  WEDM wire filter features.
   First of all, the Mitsubishi wire filter uses a particularly durable filter layer, and the outer shell of the metal mesh using rust, strong and durable. Then, the Mitsubishi wire filter is 50% more than the average filter. Then, turn off the pump after processing, Mitsubishi wire filter dirt will automatically settle to the bottom, in order to maintain good filtering effect and stable water pressure process, and the filter can also have a longer life. Finally, thespecial filter design of  Mitsubishi wire filter, so that the processing of the workpiece can have a better finish, and can avoid the two discharge and break the situation.
   With the features of Mitsubishi wire filter in production process, not only on the production wire cut accessories products play a decisive role, the same is also reflected in China Mitsubishi EDM Accessories innovation production, continuous progress!

Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com/Mitsubishi_wire_filter.html, reproduced please specify.yizebg701

Where we could find Charmilles wire EDM wear parts manufacturers?

 Now ,Charmilles wire EDM wear parts manufacturers are all over the world,not only the model,but also a lot of things.However,many international friends more like Chinese Charmilles wire EDM wear parts manufacturers, not only the model,but also a lot of things, of course,there are many China.Why more and more people choose KENOS  not only the model,but also a lot of things,the main reason for the following points:
   First of all, our Charmilles wire EDM wear parts not only the model, but also a lot of things are designed according to your drawings specifically for your machine to customize the lines you need to wire EDM wear parts.
   Then,KENOS has more than ten years of processing experience,the analysis of the drawings, delivery of the completion of the customer can give the most perfect interpretation, let you in the shortest time to get the most satisfied with the Charmilles wire EDM wear parts.
   Next,the price advantage, a lot of people will find the Chinese wholesale Charmilles wire EDM wear parts is a consideration for the same price, we KENOS also have this condition, because for more than and 10 years, the rejection rate will be much lower, the natural price cost on the control is very thoughtful, let us save cost is the biggest cost savings for customers.
   Finally,as Charmilles wire EDM wear parts,why KENOS is a professional, because many of Charmilles' raw material is our China machine manufacturers go out, we understand the machine knows more absolute than other areas of machine manufacturers, are relatively well understood. KENOS as Charmilles wire EDM wear parts wholesale manufacturers in Dongguan, the Wire edm wear parts manufacturers and strive for the majority of customer service.

Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com/Charmilles_wire_EDM_wear_parts.html, reproduced please specify. yizebg701